| ROLL FORMING MACHINE FOR Z CROSS BAR H50 PROFILE |
|
| Material Specification |
| Thickness | 1.0mm |
| Yield strength | 250MPa |
| |
| Machine Components |
| 1.5Ton*300mm Simple Decoiler |
| Load capacity | Max.1.5Tons |
| Coil inner-diameter | 510±30mm |
| Coil outer-diameter | Max.1200mm |
| Coil width | Max.300mm |
| |
| Roll Forming Machine |
| Driving system | Gear/sprocket |
| Forming station | 10 stages |
| Roller material | 45# steel, hard chorme coated |
| Shafts Diameter | Φ60mm |
| Servo motor to drive | 4KW |
| Production speed | 12600 pieces per day (16 hours, two shifts) |
| |
| Non-Stop Hydraulic Post Punching & Post Cutting Device |
| 1st hydraulic cylinder | To punch |
| 2nd hydraulic cylinder | To punch and cut |
| Cutting type | Slug breaker |
| Punching mould material | Cr12, Heat treatment |
| Cutting mould material | Cr12, Heat treatment |
| Hydraulic station | 4KW |
| | |
| PLC Control System |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±1 mm |
| Control Voltage | 24V |
| |
| Product Rack | Un-powered, 3 meters long |
