Twin Spindle CNC Turning Lathe Esy208msy with Advanced Power Milling

Product Description

Product Description
The two-axis lathe can process both ends of the workpiece at the same time in one clamping, which greatly simplifies manual operations, increases output and reduces processes. The second spindle enables full turning and expressly transfers workpieces during machining, thereby reducing cycle times. The machine adopts an optimized 30-degree inclined structure design, which also has high precision, super rigidity and excellent cutting stability. The strong structural lathe bed is made of one-piece high-strength HT300 cast iron and uses finite element analysis. The overall mechanical rigidity and stability are excellent, and it can maintain long-term reliable accuracy, improve processing stability and tool life, and stress relief treatment improves accuracy stability. The high-strength roller linear rail design structure, the transmission system adopts screw pre-tension design to improve the rigidity performance, and the simple and elegant appearance is in line with the trend of the trend. Main features of this machine tool: 1. Adopt direct drive synchronous electric spindle device: magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds. Effectively eliminate spindle vibration, and the nose deflection accuracy is within 0.002MM. Improve the surface finish of the workpiece, adopt a rear-mounted rotor, which makes installation and maintenance faster, the spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure a constant operating temperature of the spindle. The spindle system has undergone strict dynamic balance testing. The good accuracy retention, high rigidity and high efficiency enable the whole machine to not only complete finishing, but also perform rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high smoothness. product. 2. High rigidity integrated design servo power turret. It helps the servo turret's rapid and accurate tool changing performance, and when coupled with the power milling of a high-speed power axis, it achieves excellent turning and milling combined processing capabilities. The tool holder is installed using a high-rigidity BMT installation interface, and the power transmission shaft is driven by a servo spindle motor. 3. The machine tool is equipped with roller linear guides and ball screws. The heat-treated and precision-ground ball screws can ensure the best accuracy and durability. Each axis adopts a direct transfer axis structure and a double-anchor pre-relay method, which can make the heat The amount of displacement is minimized, greatly improving processing accuracy. The high-rigidity, large-sized, heavy-duty linear slide rails maintain intact accuracy when the machine is subjected to impact, and the displacement is smooth and low-noise, which can extend the service life. 4. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components to greatly reduce the failure rate. The hydraulic and lubrication systems are designed to be simple and reliable. 5. It adopts Taiwan rotary chuck cylinder and optional automatic chip removal device, which can greatly reduce the labor intensity of the operator and achieve safe and efficient production. The above functional components can be programmed and controlled, and various functions can be designed and installed according to the special requirements of the user. A special fixture. Product Parameters

Name	Unit	208MSY/E
Max. swing diameter over bed	mm	Φ680
Max. processing diameter	mm	Φ400
Max. swing diameter over cross slide	mm	Ф300
Max. processing length	mm	400
Bar diameter of spindle/sub spindle	mm	Ф52/45
Spindle nose	/	A2-6
Spindle hole diameter	mm	Ф65
Max. speed of spindle	rpm	4300
Main Spindle power	kw	18/22KW
Hydraulic cylinder/Chuck	/	8"
Sub spindle nose	/	A2-5
Sub spindle hole diameter	mm	Ф56
Max. speed of sub spindle	rpm	5500
Sub spindle motor power	kw	11
Hydraulic Cylinder/Chuck	/	6"
X/Z/Y/S axis motor power	kw	(2.9/2.9/1.8/1.2)
X/Z axis travel	mm	220/450
Y/S axis travel	mm	100(±50)/600
X/Z/Y/S axis rapid speed	mm/min	20/20/10/20
Positioning accuracy	mm	±0.005
Repeat positioning accuracy	mm	±0.003
Slide rail type	/	Roller 35mm
Power turret	/	BMT55-12T
Power turret motor	Kw	5.0
Max. speed of power tool holder	rpm	5000
The specification of outer diameter tool holder	mm	25x25
The specification of inner diameter tool holder	mm	Ф40
The adjacent tool change time	sec	0.15
Machine size	m	2700x2400x2000
Machine Weight	kg	5300
Cutting fluid tank volume	L	150
Cutting water pump	kw	0.75
Hydraulic unit box volume	L	40
Hydraulic oil pump motor power	kw	1.5
Lubricant tank volume	L	2
Automatic lubrication pump motor power	W	50
Cooling water pump power	W	750

Products Configurations

Company Profile

Quality Control
Our Advantages
FAQ
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.

---

>> YX-007mini-S handheld recording shield 6 terminals, anti-recording, prevent illegal recording
>> Lihua Small Portable Handheld Laser Marking Machine Fiber Laser Can Realize Single And Double Machine Code Sending 1064 Nm
>> Small Dish Drying Rack with Tray Compact Dish Drainer for Kitchen Counter Cabinet
>> PCD244A101 ABB module inventory spot sale
>> Cardless Ozone Dental Flosser Oral Cleaning
>> Acrylic Desk Organizer 8 Compartment Storage Organizer with Drawer for Office
>> Industrial Monocrystalline Silicon Customized Logo (Min. order 500 sets) LED Solar Street Light
>> Wire Harness 29549572 29536510 29558426 6029241303 Wire Harness 20886142 29549577 4939039 3979318
>> Pujia Infrared Therapy Lamp for Veterinary ICU Cat Kennel Care Pjdy-03 Stainless Steel Veterinary Pet Cage
>> Aoc HDMI Cable Fiber Optic HDMI Cable Metal Jacket Armor Jacket 4K/60Hz 10m/50m/100m/200m
>> Trough Ribbon Blender for Electrostatic Precipitator
>> Asphalt bitumen rotary film oven Asphlat thin film oven
>> Cwap-1 Alternating Pressure System with Pump
>> ABS Shell 2.1 Bare Copper High Speed 4K 120Hz High Definition Multimedia Interface HDMI Cable
>> A490 Bolts ASTM A325 Tc Bolt
>> Marine outboard bronze propeller 3 blade underwater propeller
>> 22-Inch LCD Advertising Media Player Video Ad Player TFT Elevator Screen WiFi Network HD Full Color LED Digital Signage
>> Taijia wireless compression Load Cell dynamometer price Dynamometer wireless load cells
>> Industrial Grade Noiseless Platform Trolley for Effortless Movement
>> DIY Laser Tepe