| Model | Unit | SG80160NC | SG80220NC | SG80300NC |
| Table size | mm | 810*1600 | 810*2200 | 810*3000 |
| Max.grinding area | mm | 810*1600 | 810*2200 | 810*3000 |
| Max.grinding height | mm | 670 (830/1000 heihgt is optional) | 670 (830/1000 heihgt is optional) | 670 (830/1000 heihgt is optional) |
| Magnetic chuck size (optional) | mm | 800*800*2 | 800*1000*2 | 800*1000*3 |
| Max.loading capacity (including chuck) | kg | 2000 | 2400 | 3500 |
| Speed of table longitudinal move | m/min | 5-25 | 5-25 | 5-25 |
| Wheel head cross move | | | | |
| Auto intermittent feed | mm/t | 1-30 | 1-30 | 1-30 |
| Rapid speed | mm/min | 50-2000 | 50-2000 | 50-2000 |
| Feed of MPG | mm/div | 0.005 | 0.005 | 0.005 |
| Wheel head vertical move | | | | |
| Auto down feed rate | mm/t | 0.005-0.05 | 0.005-0.05 | 0.005-0.05 |
| Rapid down speed | mm/min | 50-2000 | 50-2000 | 50-2000 |
| Feed of MPG | mm/div | 0.005 | 0.005 | 0.005 |
| Grinding wheel rotating speed | r/min | 960 (50HZ) / 1150 (60HZ) (1450 is optional) | 960 (50HZ) / 1150 (60HZ) (1450 is optional) | 960 (50HZ) / 1150 (60HZ) (1450 is optional) |
| Grinding wheel size | mm | 500*75*203 | 500*75*203 | 500*75*203 |
| Motor of spindle | kw | 18.5 | 18.5 | 18.5 |
| Oil pump motor | kw | 5.5 | 7.5 | 7.5 |
| Y/Z-axis servo motor | kw | 3 | 3 | 3 |
| Total rated power | KVA | 32 | 34 | 34 |
| Floor space | mm | 4800*4000*2600 | 6000*4000*2600 | 8200*4000*2600 |
| Gross weight | kg | 10500 | 12500 | 14000 |
