| US$8,000.00-12,000.00 | 1 Piece (MOQ) |
| Medicine box capacity | 3000L |
| Supporting power | four-cylinder watercooled vertical diesel engine. |
| Power/speed | 74kW/2400R/min. |
| Spray width | 21.5m. |
| Nozzle form | fan mist nozzle |
| Ground clearance | 107cm |
| Matching pump | diaphragm pump; 100L/min |
| Walking system | four-wheel drive, four-wheel steering |
| Wheel base | 228/cm |
| Tyre type | pneumatic rubber tyre |
| Spray lever control type | hydraulic |
| Note | Simple shed, fertilizer spreader, configuration can be customized |
| Efficient operation | Compared with the traditional knapsack sprayer or manual spray equipment, the operating efficiency of the self-propelled spraying machine is greatly improved. It can cover a large area of farmland or orchards in a short time, reduce manual labor intensity and working time, and improve agricultural production efficiency |
| Spray evenly | Due to the use of a professional spraying system, the self-propelled applicator can spray the liquid evenly on the crops, avoiding the problem of uneven spraying that may occur when manual spraying, thus improving the effect of pest control and fertilization |
| Strong applicability | It can be adjusted and configured according to different crops and operation needs, and is suitable for disease and pest control and fertilization operations of various crops, such as wheat, corn, rice, cotton, fruit trees, vegetables, etc |
| Reduce pesticide waste and environmental pollution | The precise spray system can control the spraying amount and spraying range of the liquid, reduce the waste of pesticides, and reduce the pollution of pesticides to soil, water and the environment |
| Improve job safety | Operators do not need to carry heavy sprayers for long periods of time, reducing labor intensity and the risk of physical injury. At the same time, the self-propelled spraying machine is designed with safety in mind and is equipped with protective devices and safety facilities to improve the safety of the operation process. |
| Routine maintenance | Clean | After each operation, clean the dust, soil and liquid residue on the surface of the machine in time to prevent corrosion of the machine parts. Focus on cleaning the medicine cabinet, nozzle, spray rod and chassis |
| Check parts | Regularly check the various parts of the machine, such as whether the screws are loose, whether the belt is worn, whether the nozzle is blocked, etc., and tighten or replace the problem in time. | |
| Replenish fuel and lubricating oil | According to the use of the machine, timely replenishment of fuel, and regular replacement of engine oil, hydraulic oil, etc., to ensure the normal operation of the machine. | |
| Regular maintenance | Replace the filter | According to the requirements of the machine instruction manual, regularly replace the air filter, fuel filter and oil filter to ensure that the engine intake is smooth, the fuel is pure and the oil is clean, and the engine life is extended. |
| Check and adjust the nozzle | Regularly check the spray effect of the nozzle, if there is poor atomization, spray amount is not equal, timely clean or replace the nozzle; At the same time, adjust the Angle and spacing of the nozzle to ensure the uniform spraying of the liquid medicine. | |
| Maintain tires or tracks | Check whether the air pressure of the tire is normal, whether the tension of the track is appropriate, if there is an abnormal adjustment in time; At the same time, clean the debris on the surface of the tire or track to avoid damage. | |
| Complete electrical system inspection | Check whether the wire connection of the machine is good, whether the lights and instruments are working normally, if there is a fault, remove it in time to ensure that the electrical system is safe and reliable. |
1. What is the delivery time? Delivery time is usually 15-60 days depending on your order quantity requirements. 2. Can you provide samples? Small parts can be supplied, but you pay for the delivery. 3. Can your company provide customized service? Our company can be customized according to your brand requirements or government requirements. 4. How to install? First, we prepare the materials and deliver them to your city. After your customs clearance, we will send 2-4 engineers or all staff to guide the installation. If you want to save money, we only send engineers, you match local workers. If you find the installation difficult, we can also send engineers and workers to install it for you. 5. What should we pay for the installation? Visas and round-trip tickets for our engineers and workers, their food and accommodation, their communication |
