UV & IR Flame Detector

Product Description

JTG-ZF-C34/JTGB-UF-C35Ex Point Type UV & IR Flame Detector Summary
JTG-ZF-C34/JTGB-UF-C35Ex point type UV & IR flame detector (hereinafter referred to detector) adopt flame multispectral signal acquisition method/full frequency wave analysis technology, it avoids the weaknesses to interference of traditional detectors. The detection environment is monitored by increasing slope signal detection technology (PAM), which improves the stability and sustainability of the detector. It ensures that the detector can quickly identify and detect fire while minimizing false alarm. The detector is suitable for all kinds of places, such as oil depot, wine depot, aircraft hangar, chemical equipment site, military equipment site, liquefied gas station, power station, tunnel, etc. With high anti-interference ability, can work well in indoor or outdoor environment.
The detector adopts six-wire connection style (two power lines, two fire touch spot lines, two fault touch spot lines), In case of alarm, the fire touch spot changes from normally open to normally closed. In case of fault alarm, the fault touch spot changes from normally closed to normally open. It can be connected with the fire alarm system of any manufactur
Technical Parameter Spectral response:190~260nm, 1.0um~1.7um. Response time:5~10s Monitoring angle:≤100° Working voltage: DC24V Static operating current: 45mA Alarm status current: 55mA Sensitivity: I class ~ class III, I class: 0-25m within the scope of the probe must be reported to the fire.
II class: 0-17 m within the scope of the probe must be reported to the fire.
III level: 0-12 m within the scope of the probe must be reported to the fire. Protection grade: IP66 Environment temperature: -10 ~ +55ºC Relative humidity: ≤93%RH(45±2ºC) Installation Angle: rotation Angle: 360°, elevation Angle: 90° Exd II CT6 Gb; Ex tD A21 IP66 T80ºC. Cable outlet thread: npt1/2 "nut explosion-proof hose is connected with outlet screw. Product size: Φ60×150mm.
Status Indicator Green: work indicator light, on when normal, internal device failure report green light does not work. Red: alarm indicator, normally off, often on fire. Power outages reset Output model Fire relay: normally open, close when alarming. Fault relay: normally closed, disconnected in case of fault Touch spot capacity: 3A /220VAC 3A /30VDC Use and Maintenance
Wiring: The wiring is shown in the picture. The red and black wires are connected to the positive and negative electrodes of the DC24V power supply. The yellow and white line is the contact output of the alarm relay, which closes when alarming. The green and blue line is the output of the fault relay, which is fault relay output, normally closed, fault disconnect. If module has terminal resistance, connect blue and green lines, yellow and white lines and terminal resistance, Resistance should be installed as close as possible to the detector. It is not recommended to install resistors near modules.

Red	DC: +24V	Connect the controller to the power supplyDC24V
Black	DC: -24V
White	Fire relay touch spot output, dry contact normally open, closed in case of fire.	Connect the alarm module signal end
Yellow
Blue	Fault relay touch spot output, dry contact normal closure, fault disconnect.	After connecting the terminal resistance in series, it is connected to the signal end of the alarm module or to the module return route in series.
Green

Installation Requirement Overlooking installation: Depression angle <45° Installation distance:The protection distance of detectors in oil sites is 3m ~ 5m. The protective space of chemical sites is 5m ~ 7m. The protection distance of smelting site is 7m ~ 10m. The protection spacing of power sites is 2m ~ 10m. There should be no obstacles blocking the line of sight of the detector in the fire area. If the obstacles cannot be avoided, the number of detectors should be considered to achieve no-dead Angle detection. Detector shell should be ground.

---

>> 100% Top Quality on The Web T800 Carbon Fiber Road Bike 24s Full Hydraulic Disc Brake Carbon Fiber Racing Bike Sr-Rd08
>> Gedeli House Large Double Glazed Metal Aluminium Windows and Doors Tempered Glass Bay Picture Fixed Casement Window
>> OEM Customized 4uy-130 1300mm Working Width Combine Herb Harvesting Machine
>> 13X13mm Half Round DIY Silicone Tube 180degree Luminous LED Silicone Light Neon Strip Light
>> Wholesale Sheet Metal Stainless Steel Aluminium Hydraulic CNC Press Brake Bending Machine 80t/2500mm
>> Metal Injection Die Casting Mould Making for Aluminum Alloy Auto Spare Parts Structure/ Chassis Mold
>> Canvas shopping bag
>> T Type Diamond Grinding Wheel, for Concrete / Granite Polishing, 4-9 in. Diameter
>> 5cbm 6cbm Waste Transfer Truck 7cbm 8cbm Garbage Transport Truck 10cbm Compactor Garbage Truck
>> 99.95% Hafnium Coil Tensile Strength 300MPa 0.1mm Dia to 3.0mm Hf Wires
>> 0.8/1.2/1.5/1.7/1.8/2.0/2.2/2.5 Ton Micro Mini Excavators Prices with Cabin
>> Wholesale Cartoon School Bag for Boys
>> SEAGUAR 100% Fluorocarbon Japanese Clear Fluorocarbon Fishing Line Angling Shock Leader For Sea Bass
>> New Arrival Used Hyundai 220-9 Used Crawler Excavator Excavators Manufactured in Korea Korea Hyundai 220 Used Excavator 22 Ton Hyundai Excavator 220-9LC China
>> 4-12 mm CNC Rebar Bender Stirrup Bending Machine Steel Wire Bending Machine Rebar Bending Machine
>> hot sale sausage filling machine.semi automatic sausage filling machine.
>> Sunray Aluminium Rollup Door Sliding Rolling Door Rolling Gate Windproof Lift Roll up Door
>> Plastic Architectural Model of a Church Hall (JW-302)
>> Automatic Drinking Mineral Water Plant Machinery Cost
>> Wholesale Manufacturer Customized Weave Bag PU Knit Shopper Woman Shopping Tote Lady Handbag