Rules for the use of the UKCA Mark for products exported to the United Kingdom

Product Description

Product Description
Rules for the use of the UKCA mark
1. Add UKCA logo
Until 1 January 2023, for most products (except those subject to special rules), the UKCA logo may be affixed to the label of the product or to the accompanying document. From 1 January 2023, the UKCA logo must be affixed directly to products in most cases. Therefore, enterprises should start to prepare for this.
1. Add UKCA principles:
1. The UKCA mark may only be affixed to the product by the manufacturer or its UK authorized representative (where permitted by law)
2. When affixed with the UKCA mark, the manufacturer shall take full responsibility for the compliance of the product with the relevant regulations
3. Only the UKCA mark can be used to prove product compliance with relevant UK law
4. No mark or mark shall be provided to a third party which may misinterpret the meaning or form of the UKCA mark
5. No other mark shall be placed on the product that affects the visibility, legibility or meaning of the UKCA mark
6. The UKCA logo shall not be placed on products unless expressly required by law
Ii. Rules using the UKCA mark Manufacturers must ensure that:
1. If the size of the mark is reduced or enlarged, the relevant proportion of the letters of the UKCA mark shall be observed
2. The height of the UKCA mark shall be at least 5 mm unless a different minimum size is specified in the relevant legislation
3. The UKCA logo shall be clearly visible
Three: technical document requirements
1. Record keeping. The manufacturer or its authorized representative (where permitted by law) must keep documents proving that the product meets regulatory requirements. After a product is put on the market, it must be kept for 10 years. The documents retained will depend on the specific regulations related to the product, but a general record of the following must be maintained:
2. How are products designed and manufactured
3. How to prove that the product meets the relevant requirements
4. Address of the manufacturer and any storage facilities

---

>> Water Pump For NISSAN Parts No.21010EA010
>> Crazy horse cow bifold Leather Wallet for mens customised custom logo genuine leather wallet
>> YFMC-720A/920A/1100A Manual Thermal Lamination Machine With CE Standard
>> Vikson Smart Home Customizable Motorized Curtains Remote Control Electric Automatic Curtain Motor Automatic Curtain Opener
>> Finger Touch Screen Wall Mount Floor Stand Touch Screen Smart White Board
>> 12V 100Ah LiFePO4 Battery
>> New Style Design Commercial Blender for Store Carrying Et-999z
>> Screw feeder
>> small vacuum deep fryer for fruit and vegetables
>> Durable Replacement Engine Parts for 168f Cylinder Head Assembly
>> ELME Spreader Coupling 791261 786807 Konecranes Hydraulic Motor 761111 52567376
>> Concrete Pump Diesel and Electric Cement Concrete Pump
>> Necklace 1.5ct emerald picture necklace pendant 925 sterling silver necklaces for Girl
>> High Efficiency SS316 L Decanter Centrifuge for Sludge Dewatering
>> Tolerance Range 0.002mm Custom Stainless Steel Aluminum Plastic Small Metal 5 Axis CNC Machining Parts
>> Advanced Sand Reclamation Molding Machine with Automated Operation System
>> Bottled blue color-changing silica gel 3-5mm large particle transformer moisture-proof adsorbent
>> HF-SP201B Mitsubishi Servo Modular AC Semi Closed Loop Control
>> Fanta M4d Turret Milling Machine Spindle to Table Distance 500mm
>> Single Faced Corrugated Cardboard Sheeter