| US$5,000.00-8,000.00 | 1 Set (MOQ) |
| 1)High-quality motor with long-lasting battery life,high-quality accessories,long use life and strong power. |
| 2)Compared with the traditional river harvester,our machine has undergone many improvements,and the material is corrosion-resistant and not easy to rust. Machine frame,chain,blade,conveyor,motor protective cover,etc,are all made of stainless steel,and the front and rear spindles are made of high-brightness chrome-plated materials. |
| 3)The use of stainless steel three-knives design makes mowing more efficient. The blade is enlarged(height 106mm,width 60mm),which can easily cut off the underwater plants,lotus leaves,reeds and water hyacinth,etc. |
| 4)The structure is strong,people can stand on the conveyor belt,and the service life is longer. The conveyor belt is reinforced with steel wire,which is more reliable and not easy to deform. All use bold materials,stainless steel 5-point chain,conveyor belt stainless steel outer diameter 19mm,pipe distance 6.3mm from the center. |
| 5)An extra strong board is added to the ship's surface,so that the operator's feet will not be too hot in summer.At the same time,it can protect the stainless steel plate of the ship's surface and make the ship more durable. The foam in the hull is upgraded to high density,and the foam enters less water. The ship board is divided into three or four sections,each section is equipped with a handle for easy transportation. |
| 1. Labor saving: The working efficiency of one machine is equivalent to the working efficiency of 30 people |
| 2. Easy to transfer: under the premise of ensuring the rigidity of the lawnmower, the weight is reduced as much as possible to facilitate the manual lifting of the turning pond |
| 3. Unique design: reduce the distance between the scissors part and the conveying part to prevent the cut grass from falling into the pond. |
| 4. Easy to disassemble: The scissors part, conveying part and foam hull can be easily disassembled for maintenance and conveying. The main shaft is not welded. |
| 5. Reduce water inflow and extend service life: The steel pipe of the conveying rack is completely closed, and water cannot enter the steel pipe, which can reduce rust and thus prolong service life |
| 6. Easy to use: insert 48V battery pack, you can easily use the switch |
| 1. During use, lubricate each part of the bearing |
| 2. The moving part of the knife rod is lubricated with oil every month, which makes it smoother when used. |
| 3.Electrical parts to prevent water from entering |
| Model | Note |
| Single knife 1.2m a whole set | Each board specification: 1.2*2*0.2 meters, 4 pcs Gasoline motor Battery 48V-33.9A |
| Single knife 1.5m a whole set | Each board specification: 1.2*2*0.2 meters, 4 pcs Gasoline motor Battery 48V-33.9A |
| Three-knives 1.5m a whole set | Each board specification: 1.2*2*0.2 meters, 4 pcs Gasoline motor Battery 48V-33.9A |
| Three-knives 2m a whole set | Each board specification: 1.2*2*0.25 meters, 4 pcs Diesel motor Battery 48V-46.9A |
| Product Package | |
| stainless steel river cleaning machine host+ foam ship+ railing+transport grass machine+battery+propeller+wooden package | |
| River cleaning machine host parameters | |
| Dimension | Host machine2M*2M(L*W) |
| Single knife/Three knives | 1.2m/1.5m/2 meters horizontal knife,0.6 meter vertical knife(three knives only) |
| Underwater mowing depth | 60-70 cm |
| Material | Blades, chains, straw tubes, frame, Bearing use stainless steel |
| Weight | About 250kg |
| Operating hours | Full power can work for 6-10 hours |
| Host battery | 32A 48V motor 500W |
| Foam ship | |
| Each board 2 meters wide, 1.2 meters long, 0.2 meters high. It consists of three or four sections, each weighing about 40 kg, which can be assembled. At the same time with a strong board to protect the surface of the ship, stepping on it will not be hot. | |
| Propeller | Diesel/Gasoline |
| 1,How long does the machine guarantee? |
| We guarantee one year for non-human damaged factors. |
| 2,After-sale service? |
| Engineers available to come to your factory for supplying training and installation. |
| 3,How to control the quality? |
| We have professional engineers and inspectors make sure that each part of machine working well before shipment. |
| 4,How to contact you? |
| You could contact us via TM, Skype, Whatsapp, Wechat, QQ, Email |
| 5,What about payment terms? |
| T/T, Western Union, Paypal, Cash, L/C, Trade Assurance, etc.. |
| 6,If any other questions please don't hesitate to contact us any time... |
