| US$18,000.00 | 1 SET (MOQ) |
| SPECIFICATION | LTY1100 | ||||
| A | B | C | D | ||
| INJECTION UNIT | |||||
| SCREW DIAMETER | mm | 32 | 35 | 38 | 42 |
| SCREW L/D RATIO | L/D | 24.1 | 22 | 20.2 | 18.4 |
| SHOT VOLUME(THEORETICAL) | cm3 | 137 | 163 | 192 | 235 |
| INJECTION WEIGHT(PS) | g | 125 | 148 | 175 | 213 |
| INJECTION RATE | g/s | 74 | 89 | 105 | 128.1 |
| INJECTION PRESSURE | MPa | 260 | 219 | 186 | 152 |
| SCREW SPEED | rpm | 255 | |||
| CLAMPING UNIT | |||||
| CLAMP FORCE | kN | 1100 | |||
| OPEN STROKE | mm | 350 | |||
| SPACE BETWEEN TIE BARS(W*H) | mm | 410x410 | |||
| MAX.MOULD HEIGHT | mm | 380 | |||
| MIN.MOULD HEIGHT | mm | 150 | |||
| EJECTOR STROKE | mm | 100 | |||
| EJECTOR FORCE | KN | 38 | |||
| OTHER | |||||
| MAX.PUMP PRESSURE | MPa | 16 | |||
| PUMP MOTOR POWER | kW | 13 | |||
| HEATING POWER | kW | 8.2 | |||
| MACHINE DIMENSION(L*W*H) | m | 4.15x1.12x2.00 | |||
| OILTANK CUBAGE | L | 200 | |||
| MACHINE WEIGHT | t | 3.4 | |||
