Product Description
Product Description
Product Description
The briquette machine is mainly used for making pellets of non-ferrous and ferrous metal ore powder, coal powder, carbon powder, and directly into the furnace for smelting to increase the added value. All the scrap and auxiliary materials in the metallurgical industry need to be completed by the ball press. For example: dust removal ash, pool mud, scale, steel slag, iron fine powder, aluminum ash powder, silicomanganese ore powder, etc.
Details Images
Working principle
The roller of the briquette machine is cast with 65 manganese. After special heat treatment, the hardness can reach more than 58 degrees. Roller skins are assembled and assembled and can be replaced after wear. The mineral powder ball machine has a buffer device, which can better protect the equipment from the impact of hard objects.The main motor of the ball press machine: through the V-shaped belt, it is transmitted to the reducer: the reducer is transmitted to the driving shaft through the coupling, and then is driven by a pair of open gears to ensure the synchronization of the two roller shafts (opposite constant speed). The piston of the oil cylinder bears (constant pressure is held by oblique iron), and the system pressure is ensured by the hydraulic circuit, hydraulic control valve and accumulator. The material enters the hopper of the molding machine evenly through the quantitative equipment from the storage bin through the quantitative equipment. The adjustment gate adjusts so that the material evenly enters the middle of the counter-roller. The unit forming pressure of the counter-rotating counter-rotating roller at constant speed compresses the material from small to large. The molding pressure at the center line of the counter-roller reaches the maximum value. After the thread, the forming pressure quickly decreases and the sphere quickly falls.
Product Characteristics
The high-pressure briquette machine is mainly used for pressing powder materials that are difficult to form. The high-pressure briquette machine is characterized by large forming pressure, adjustable host rotation speed, and a screw feed device. The shape of the pellets produced by the high-pressure briquette machine determines whether the material is completely burned or the gas permeability during smelting. It occupies an important factor in the entire process. In the actual use of the high-pressure ball press, the more the shape of the pellets approximates an irregular shape, like lump coal, the better its combustion permeability and the more complete the combustion. If the shape of the pellet is a polygonal polygon, it is estimated according to the technical theory that it has many contact surfaces and warp angles, which is easy to form a framework. It is natural in combustion and smelting, but it is more difficult to process molds. Many companies are engaged in process processing. No, so the market is mostly circular. Main application range: The high-pressure briquette machine is mainly used to suppress lignite, coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke powder, etc. Various powders, powders, wastes, and waste residues are widely used in refractory materials, power plants, metallurgy, chemical industry, energy, transportation, heating, and other industries. The materials produced by the ball press machine are energy-saving and environmentally friendly, easy to transport, and improve the The utilization rate of waste has good economic and social benefits.
Product Paramenters
Model
| Roller Size(mm)
|
| Total Pressure
(t)
| Main Power
(kw)
| Pre-press Power
(kw)
| Hydraulic Pump Power
(kw)
| Capacity
(t/h)
|
| Dia.
| Width
|
|
|
|
|
|
QYQ-476-1
| Φ476
| 196
| 95
| 45
| 15
| 1.5
| 1-2
|
QYQ-476-2
| Φ476
| 210
| 95
| 55
| 15
| 1.5
| 2-4
|
QYQ-520
| Φ520
| 196
| 95
| 55
| 15
| 1.5
| 3-5
|
QYQ-650
| Φ650
| 196
| 100
| 75
| 18.5
| 1.5
| 4-6
|
QYQ-672
| Φ672
| 275
| 100
| 75
| 22
| 2.2
| 6-10
|
QYQ-750
| Φ750
| 196
| 120
| 110
| 22
| 2.2
| 5-8
|
QYQ-850
| Φ850
| 196
| 120
| 132
| 22
| 2.2
| 6-10
|
Recommend Products
High pressure briquette machine
Hydraulic brquette machine
mechanical pressure briquette machine
Company Profile
>>
Led Headlight Car Accessory Light FOR CHEVROLET EQUINOX 84258431
>>
barbecue machine | automatic rotating barbecue machine
>>
16W 1200mm 90~265V 50/60Hz T5 No Flicker Type LED Tube
>>
UHMWPE Plastic Dump Truck Bed Liners Sheet with Self Lubricating Property
>>
Hot Runner Injection Plastic Bottle Botella Preform Mould Maker
>>
Haiwen Water-Resistant Polyester Putty for Car Body Work and Automotive Body Paint
>>
wholesale of hexagonal bolts for steel structures. customized according to drawings. special for steel structures. delivered nationwide.
>>
Australia/NZS standard sound proof and water proof aluminium glass tilt and turn window for bathroom
>>
Fem Standard 10t Lhc-D Double Girder Hoist with High Quality for Workshop
>>
Reflexology Heating Vibration Foot and Calf Massager with Adjustable Bar
>>
Qingdao Promising Brake Caliper Repair Kit for China Loader
>>
50ml PFA Block Digestion Tubes
>>
Industrial 5g Router Openwrt WiFi6 3000Mbps Mt7981b Dual SIM 4G Modem Routers
>>
Jwell Automotive Liner Plate Composite Plate Extrusion Machine for High Strength Hmw-HDPE Material
>>
2 Rows corn seeder maiz sembradora corn planter corn sower maize seeder machine with walking tractor
>>
Single Jacket, EPDM Linning, 200psi, 2-1/2"Fire Hose
>>
Efficient and Safe Farming Equipment Mower for Cutting Grass
>>
CNC Twin Head Milling Machine LC Machine Brand Same as Takeda Bxr Series-CNC Milling Machine with High Performence
>>
High Quality Sinotruk HOWO 6X4 Fire Truck Euro 2 Euro 3 400HP
>>
CE/EPA/ISO/UL Permanent Magnet Synchronous Mini Carport Excavator
