| SPECIFICATION | C6266Y | C6280Y | C62100Y | ||
| CAPACITY | Max.swing over bed | Φ660mm(26") | Φ800mm(31.5") | Φ1000mm(40") | |
| Max.swing over cross slide | Φ435mm(17") | Φ560mm(22") | Φ705mm(28") | ||
| Max.swing over gap | Φ860mm(34") | Φ1000mm(40") | Φ1200mm(47") | ||
| Effective length of gap | 280mm(11") | ||||
| Center Distance | 1000mm/2000mm/3000mm/4000mm(40"/80"/120"/160") | ||||
| Bed Width | 400mm(16") | ||||
| HEADSTOCK | Spindle hole | Φ103mm(4") | |||
| Spindle nose | ISO-D11 | ||||
| Spindle taper | Φ115mm(4-1/2") | ||||
| Spindle speed(Number) | (cw/18)9-1275rpm (cw/6)16-816rpm | ||||
| FEEDS | Longitudinal feeds range | 72kinds 0.073-4.066mm/rev. | |||
| Cross feeds range | 72kinds 0.036-2.033mm/rev. | ||||
| Metric threads range | 72kinds 0.5-112mm | ||||
| Inch threads range | 72kinds 1/4-56mm | ||||
| Module threads range | 36kinds 0.5-7 inch | ||||
| Diametric threads range | 36kinds 4-56D.P | ||||
| CARRIAGE | Max.travel of top slide | 110mm(4-3/8") | |||
| Max.travel of cross slide | 325mm(13") | ||||
| Max.size of tool shank | 32mm×32mm(1-1/4"×1-1/4") | ||||
| TAILSTOCK | Dia.of tailstock sleeve | 90mm(3-1/2") | |||
| Taper of tailstock sleeve | MT6 | ||||
| Max.travel of tailstock | 150mm(6") | ||||
| MOTOR | Main drive motor | 7.5kw | 11kw | ||
| Rapid traverse motor | 250W | ||||
| Coolant pump motor | 125W | ||||
| PACKING LxWxH | Center Distance(1000mm) | 2820×1300×2100mm | |||
| Center Distance(1500mm) | 3320×1300×2100mm | ||||
| Center Distance(2000mm) | 3820×1300×2100mm | ||||
| N.W/G.W | Center Distance(1000mm) | 3000/3600kg | 3150/3750kg | 3300/3900kg | |
| Center Distance(1500mm) | 3250/3850kg | 3400/4000kg | 3550/4150kg | ||
| Center Distance(2000mm) | 3500/4150kg | 3650/4300kg | 3800/4400kg | ||
