| Rated Charge current(A) | 40A |
| Rated DC voltage(V) | 24/48 automatic identification |
| Solar input Max voltage(V) | 42/84 |
| Battery | Over charge protective voltage(V) | 28.6/57.2 |
| Battery | Over charge recover voltage(V) | 27.4/54.8 |
| Battery | Constant charge voltage(V) | 27/54 |
| Battery | Over discharge alarm voltage(V) | 20/40 |
| Environment Humidity and temperature | 0-90% No condense,55ºC |
| Protective Functions | Protection against anti-charge at night,
battery over charge, over discharge protection,
Joint-reversed of solar modules |
| Components | Parameter | Function |
| Circuit breaker (Air switch) | 16A | When the current of the protected circuit exceeds the specified value,
the circuit breaker will automatically break off to protect the whole circuit. |
| Fusegear | 16A | When the current of the protected circuit exceeds the specified value,
fusegear will break off automatically |
| Surge protective device (SPD) | UC:420V lmax:20KA; In: 10KAUp≤1.8KV | Photovoltaic lightning protection device |
| One phase self dual over voltage protection device | Working range 220V,50Hz, over voltage protection
Uvo=270V±5V
Under voltage protection
Uoe= 170±5V | When the circuit voltage is highet or lower, it will shut down automatically.
when the voltage reaches standard level, it will recover automatically. |
| Knife switch | / | automatic/ by hand |
The wind capacity of such mounting system can reach (40m/s, 32.5kg/ square meters, level 13), snow load capacity can reach 70kg/ square eters
The whole system has strong safety performance.
The mounting system can be desingned with best solution based on slope roof, flat ground and soil ground
