| Item No | name | Specification |
| 4302-0032-0080 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 80 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 80 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 40 tooth servo gear. The combo creates a 2:1 underdrive, slowing the final speed while increasing the torque twofold. Weight 21g Material Aluminum Finish Clear Anodized Tooth Count 80 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4302-0032-0090 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 90 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 90 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 30 tooth pinion gear or servo gear. Using the pinion gear you can create 3:1 underdrive or overdrive setup depending on your application. When used with the 30 tooth servo gear, the combo creates a 3:1 underdrive, slowing the final speed while increasing the torque by 3x. Weight 28g Material Aluminum Finish Clear Anodized Tooth Count 90 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4302-0032-0096 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 96 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 96 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 24 tooth pinion gear or servo gear. Using the pinion gear you can create 4:1 underdrive or overdrive setup depending on your application. When used with the 24 tooth servo gear, the combo creates a 4:1 underdrive, slowing the final speed while increasing the torque by 4x. Weight 33g Material Aluminum Finish Clear Anodized Tooth Count 96 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4302-0032-0100 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 100 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 100 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear. However when building on pattern, the most common partner for this gear is a 20 tooth pinion gear or servo gear. Utilizing a pinion gear you can create a 5:1 underdrive or overdrive setup depending on your application. When used with the 20 tooth servo gear, the combo creates a 5:1 underdrive, slowing the final speed while increasing the torque by 5x. Weight 35g Material Aluminum Finish Clear Anodized Tooth Count 100 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4302-0032-0105 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 105 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 105 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear. However when building on pattern, the most common partner for this gear is a 15 tooth pinion gear or servo gear. Utilizing a pinion gear you can create a 7:1 underdrive or overdrive setup depending on your application. When used with the 15 tooth servo gear, this combo creates a 7:1 underdrive, slowing the final speed while increasing the torque by 7x. Weight 38g Material Aluminum Finish Clear Anodized Tooth Count 105 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4302-0032-0108 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 108 Tooth) | The massive 32mm bore works well for larger builds that require additional strength and size in the rotating assembly. This bore size allows you to utilize shafting and tubing up to 32mm diameter such as our goTUBE and 32mm OD Aluminum Tubing. These gears have the 32mm mounting pattern so they're compatible with any of the 1302 or 1305 Series Clamping Hubs.The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 108 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear. However when building on pattern, the most common partner for this gear is a 12 tooth servo gear. When used with the 12 tooth servo gear, the combo creates a 9:1 underdrive, slowing the final speed while increasing the torque by 9x. Weight 41g Material Aluminum Finish Clear Anodized Tooth Count 108 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
