| Technical date | ||
| Spindle head | type | FL220 h5 |
| Spindle maximum speed | rpm | 3000 |
| Max. Torque | N×m | 420 |
| Spindle power | Kw | 15-18.5 |
| Chuck diameter | mm | 250 |
| Spindle bore | mm | 102 |
| Front bearing diameter | mm | 140 |
| Spindle bearing lubrication | type | Grease |
| Linear motion lubrication | type | Oil |
| Speed range | rpm | 5-3000 |
| Work area | ||
| Maximum swing over bed | mm | 680 |
| Maximum cutting diameter | mm | 465 |
| Maximum cutting length | mm | 1000 |
| Maximum bar capacity | mm | 75 |
| Travel of Z-axis | mm | 1050 |
| Travel of X-axis | mm | 260 |
| Travel of Y-axis | mm | ±60 |
| Ball screw | ||
| X/Y/Z axis ballscrew DxP | mm | 40 x 10/40 x 5/40 x 10 |
| Feed | ||
| Rapid traverse Z | m/min | 24 |
| Rapid traverse X | m/min | 24 |
| Rapid traverseY | m/min | 12 |
| Rapid traverse C | m/min | 100 |
| Feed force | ||
| Feed force X/Z | N | 7500 |
| Number of axis | | 4 |
| Measuring system | ||
| X/ Y/Z axis measuring system | | Absolute rotative |
| (X / Y/Z);VDI/DGQ 3441 Positioning | mm | 0.008/0.008/0.01 |
| (X /Y/ Z);VDI/DGQ 3441 Repeatability | mm | 0.005/0.008/0.008 |
| Tool attachments | ||
| Power turret | | BMT55 |
| No. of tool stations Driven tools | # | 12 |
| T-T time | sec | 0.25/0.5 |
| OD tool size | mm | 25/40 |
| Maximum speed of tool driven | rpm | 3000 |
| Tool driven power | Kw | 3 |
| Max. torque of tool driven | N×m | 45 |
| Electrical specifications | ||
| Voltage | V | 380 ±10% |
| Frequency | Hz | 50 ± 1% |
| Max. installed power | KVA | 50 |
| 400v lie protection fuses | A | 100 |
| Connection cables section | mm2 | 4 x 10 |
| Hydraulic unit | ||
| Max. working pressure | bar | 50 |
| Reservoir capacity | l | 35 |
| Pump flow | I/ in | 24 |
| Coolant system | ||
| Pump delivery/Capacity with tank | l /min | 30/180 |
| Pump pressure | bar | 5 |
| Noise level | ||
| Less than | dB (A) | ≤80 |
| Control system | | |
| FANUC | - | 0iTF plus |
| Net weight | kg | 7800 |
