GPON

Product Description

Product Description
The GPON provided by Primus IT has three advantages: the first transmission distance is longer, the use of optical fiber transmission, the coverage radius of the access layer can reach 20 kilometres; the second can provide a higher bandwidth, 2.5G downstream / 1.25 upstream per user G (physical layer); the third optical splitting characteristic is strong, can lead to the multi-channel to the home optical fiber from a single fiber at the office end after splitting, saving optical fiber resources.
Specifications of GPON

P/N

Product Description

Data Sheet

Data Rate(Gbit/s)

TX_Min(dBm)

TX_Max(dBm)

RX_Min(dBm)

RX_Max(dBm)

Power Consumption

Reach

Temperature(degC)

PGS12-B3420

Gpon OLT B+ SFP Tx1.244G/Rx2.488G

√

TX 1244Mbps/RX 2488Mbps

DFB 1310nm

1490nm APD-TIA

1290nm

1330nm

1480nm

1500nm

20km

0 to +70°C

PGS24-B4320

Gpon OLT B+ SFP Tx2.488G/Rx1.244G

√

TX 2488Mbps/RX 1244Mbps

DFB 1490nm

1310nm APD-TIA

1480nm

1500nm

1290mm

1330nm

20km

0 to +70°C

The Difference Between EPON and GPON Optical Fiber Networks
EPON and GPON china are two typical passive optical networks (Passive Optical Networks, PONs), which belong to short-distance optical cables. They are often used in urban areas to realize Internet surfing, Internet voice and digital TV signal transmission. They can also be used in cellular base stations. Backhaul connection, Wi-Fi hotspot communication, and even distributed antenna array. The biggest difference between the two is that the download and uplink communication protocols are different.
GPON uses wavelength division multiplexing refereed as WDM technology to make uploading and downloading at the same time. Usually, the download uses a 1490nm optical carrier, while the upload selects a 1310nm optical carrier. If you need to transmit TV signals, it will also use 1550nm optical carrier. EPON is fully compatible with other Ethernet standards, so when connected to an Ethernet-based network, no conversion or encapsulation is required, and the maximum payload is 1518 bytes.
EPON does not need to use the CSMA/CD access method in some Ethernet versions. In addition, because Ethernet transmission is the main method of local area network transmission, there is no need for network protocol conversion in the process of upgrading to a metropolitan area network.
GPON Onu Device Functions
The network topology of passive optical fiber transmission is mainly composed of OLT (Optical Line Terminal), ODN (Optical Distribution Network), and ONU (Optical Network Unit). ODN provides optical transmission means for OLT and ONU. It consists of passive optical splitter and passive optical combiner. It is a passive device that connects OLT and ONU. The transmission of upstream data is uniformly controlled by the OLT. The ONU transmits user data according to the time slot allocated by the OLT to avoid data transmission conflicts generated by the ONU. The ONU inserts uplink data in its own time slot according to the time slot allocation frame, which realizes the sharing of uplink channel bandwidth among multiple ONUs. Primus IT provides a variety of customized solutions, including 5g, 10g gpon to sfp, from configuration designing, programming and codingsolutions to fit our customer's gpon onu device needs.
Advantages of GPON System Technology
GPON is very popular in the optical fiber market. In addition to its advanced technology, it also has the following advantages:
1. Range: Single-mode fiber can transmit data from 10 to 20 kilometers, while conventional copper cables are usually limited to a range of 100 meters.
2. Speed: The downstream transmission rate of EPON is the same as its upstream rate, which is 1.25 Gbit/s, while the downstream transmission rate of GPON is 2.48 Gbit/s.
3. Security: Due to the isolation of signals in the optical fiber, GPON is essentially a safe system. Because they are transmitted in a closed circuit and contain encryption, GPON cannot be hacked or eavesdropped.
4. Affordability: GPON optical fiber cables are cheaper than copper LAN cables, and can also avoid investment in wiring and related electronic equipment, thereby saving costs.
5. Energy saving: Contrary to the standard copper wire in most networks, the energy efficiency of GPON has increased by 95%. In addition to efficiency, Gigabit passive optical networks also provide a low-cost solution that can increase users through splitters, which is very popular in densely populated areas.
Primus lT is a professional gpon suppliers, we provide fiber optic transceiver, gpon rj45, gpon rf, gpon 5g, gpon 10gbps, gpon 10gb, datacenter etc. Want to know more? Contact us.