| US$30,000.00 | 1 SET (MOQ) |
| SPECIFICATION | LTY1600 PET | ||||
| INJECTION UNIT | |||||
| SCREW DIAMETER | mm | 65 | |||
| SCREW L/D RATIO | L/D | 25 | |||
| SHOT VOLUME(THEORETICAL) | cm3 | 895 | |||
| INJECTION WEIGHT(PS) | g | 961 | |||
| INJECTION RATE | g/s | 384 | |||
| INJECTION PRESSURE | MPa | 130 | |||
| SCREW SPEED | rpm | 134 | |||
| CLAMPING UNIT | |||||
| CLAMP FORCE | KN | 1600 | |||
| OPEN STROKE | mm | 435 | |||
| SPACE BETWEEN TIE BARS(W*H) | mm | 470*470 | |||
| MAX.MOULD HEIGHT | mm | 560 | |||
| MIN.MOULD HEIGHT | mm | 180 | |||
| EJECTOR STROKE | mm | 135 | |||
| EJECTOR FORCE | KN | 70 | |||
| OTHER | |||||
| MAX.PUMP PRESSURE | MPa | 16 | |||
| PUMP MOTOR POWER | kW | 30 | |||
| HEATING POWER | kW | 22.3 | |||
| MACHINE DIMENSION(L*W*H) | m | 5.73x1.45x2.12 | |||
| MACHINE WEIGHT | t | 6.4 | |||
