Product Description
Product Description
AS 5637.1 is a standard for determining the fire hazard characteristics of wall and ceiling linings. It is based on the results of the AS 3837 heat release rate test (small area method) or the ISO 9705 full-scale room combustion test (large area method) for grade assessment. Generally, decorative materials are generally tested according to the Australian standard AS 3837 and then graded according to AS 5637.1.
AS3837-Reaction to Fire Test-Heat Release Rate Test Standard for Building Materials, while AS 3837 is a test method based on the heat release rate test standard ISO 5660. Except for the smoke test, other test methods and test equipment of the ISO test method are based on the ASTM E1354 standard, using an oxygen consumption calorimeter to test the heat release and visible smoke release of materials and products.
ØTest sample requirements
If AS 3837 is used for testing, the sample must be 100mm×100mm×actual thickness (not exceeding 50mm).
ØTest items
ŸHeat release rate: Determined by oxygen consumption. The heat release rate of Group 1 materials during the test is low, and its peak and average values must meet the limits specified in the standard.
ŸEffective heat combustion value and material mass loss rate: Along with the heat release rate test, the mass loss rate of the sample is measured to calculate the effective heat combustion value. The effective heat combustion value and mass loss rate of Group 1 materials should be within a certain range.
ŸSmoke release rate: The smoke release rate is determined by measuring the light shielding of the combustion products. The amount of smoke generated during the combustion of Group 1 materials is small and the smoke generation rate is low.
Flammability: The time from initial exposure to sustained combustion is measured. Group 1 materials have a higher difficulty in ignition and a longer ignition delay period.
ØAS 5637.1 Procedure for the assessment of internal wall and ceiling linings
(a) their tendency to burn;
(b) their release of heat once ignited;
(c) their tendency to cause flashover;
(d) their tendency to release smoke; and
(e) their contribution to the growth of a fire, and the determination of the number of groups, the smoke growth rate index (SMOGRARC) and, if required, the average specific extinguishing area (ASEA)
>>
92%Nylon 8%Spandex Full-Dull Nylon Warm Durable Outdoor Fabric
>>
Linear Drive Micro Controller Close Loop Name 17 Stepper Motor
>>
Standard Inox 304 Stainless Steel Casted BSPT Type-DC Thread Dust Cap Camlock
>>
OGM series Diesel Fuel Flow Meter Liquid Flowmeter Electronic Water Meter
>>
High Frequency Moisture Meter MS350A
>>
Coaxial Cable TV coaxial cable RG6 coaxial cable RG6 - u
>>
Overland Car Accessories Sliding Rear Drawers for Ford/Jeep /Mitisubishi/ Nissan /Toyota Holden ISUZU Land Rover Mazda Drawer
>>
Automatic Concrete Electric Utility Pole Production Line
>>
Hot selling Chicken Powder Chicken Seasoning Food Additive
>>
Manufacturer Nickel Expanded Metal Mesh Screen for Industrial Application
>>
Large hot plate foam welding machine foam bonding welder for epe foam bonding
>>
Prime Hammer Multi-Functional Hammer Tool
>>
2025 Tws M10 Earbuds Wireless Bluetooth Fast Charging Touch Earphone Gaming 4 Noise Cancelling Tws Earphones & Headphones
>>
Top-of-The-Line Jeegee Stubble Plough for Advanced Paddy Farming
>>
China Factory PVC/UPVC Glass Interior Sliding Doors for House
>>
Headlamp Assembly for LAND ROVER Range Rover Vogue 2013 2014 2015 2016 2017 AFS 16 pins
>>
Standards and procedures for export of children's outdoor tents to the European Union
>>
Extraordinarily Sturdy and Durable Ka - 40cmy Dual - Spindle Gang - Tool Lathe
>>
KCMCO Spring Machine with Multi Axis KCT-1220WZ 2.0mm Metal Stamping Springs for Torsion Spring Machine
>>
Nb Smoke Detector
