LPG Tire Cylinders 51L LPG Tire Bottle 580mm Wall Thickness Industrial Use 180mm Height

Product Description

The manufacturing process of LPG Tire cylinders
The material of the gas tank is steel with a thickness of about 2.5mm, and the gas tank is a kind of steel cylinder for storing gas. Because of the special use of the cylinder and the production process, the steel material is high strength steel and can meet its strength requirements.
The round sheet material is stamped out by the punch and die, and the material has been carefully calculated according to the size of the cylinder. "Gas tank" in the long-term filling, transportation, use of the process by collision, exposure, medium corrosion damage, will produce fatigue cracks, pits, deformation, corrosion and other defects, these defects are the direct cause of the explosion accident, if you encounter such a phenomenon, should be abandoned in time, after all, like this cylinder only a hundred blocks.
Preheat forming
The hardness of the material is strong, in order to reduce the internal stress of the material and reduce the yield strength of the material, it is necessary to heat the material, commonly known as hot flushing.
The hanger pulls out the preheated iron block and enters the next forming process.
The preheated material is placed on the lower die of the press by manual use of tools. The lower die has two pieces of positioning to prevent the material from being placed in the wrong position. After the material is placed, it is time to press the forming stage.
The press presses the material into bottle shape without any effort
After the first stamping is completed, the diameter of the cylinder is still relatively thick, and of course, it needs to be fine blanking, including surface smoothness, and to reach the standard size
The emulsion needs to be added during fine blanking. Benefits: 1. Cooling; 2. Prevent workpiece strain; 3. Lubrication, etc
The stamped base is prepared in advance and combined with the cylinder base by the press to ensure the quality of the bottom
The workpiece moves in a circle, the equipment at the opening continues to heat, and the spinning machine moves regularly.

NO.	liner diameter	working pressure	thickness	length	weight	quantity(pc)
40L	580mm	200bar	4.8mm	200mm	19.6kg	100

---

>> Aftermarket Engine Parts 3304PC Cylinder Head 8N1188
>> ZICAR multiple fonction double plate edge banding machine with conner
>> China Factory 146m Se14630 Se14632 Wind Turbine Generator
>> Processing and production of conveyor belt polyamide floor stick wear-resistant transmission high-temperature mining nylon floor
>> High Pressure Hot Water Solar Panel
>> aluminium sliding glass door and soundproof interior door with sliding door locks
>> Advanced Laser Engraving Inte FPC Window Cutting Machine for High Precision Cutting
>> Nahs Sodium Hydrosulfide for Chemical Industrial Used CAS 16721-80-5
>> Factory Price Automatic Daily Hand Soap Filling Production Line Filling Machine
>> Flame Retardant Insulative Corrosion-Resistance PVC CPVC Electric Power Pipe Machine
>> 3 Axle Oil Tanker Large Capacity 45000L 40000 L Petrol Gasoline Diesel Tank Fuel Tanker Semi Trailer for Sale
>> Classic BPA-Free Reusable Ss 304 Double-Wall Long-Lasting Vacuum Flask with 2 Uses Cup Lid Dishwash Safe
>> Lorawan Water Meter Module Cyble Sensor
>> modern gold stainless steel clear glass top dining table event dining table
>> LC8816 Addressable Rgbw Led Strip Smd5050 Rgbw 60Pcs/M Sk6812 12V 12mm 8mm Wide Pixel Led Strip Light
>> Custom Winter Jacket Style Padded Puffer Down Jacket Custom Logo Print
>> Best Quality Machine Thailand Greenhouse Growroom Ceiling Mounted Dehumidifier Machine Commercial
>> Non-Woven Bags Colored Treat Bag for Shopping
>> Reasonable Price Customization Decorative Expanded Metal Mesh for Decorative Facade Cladding
>> PE GLOVES