| US$4,000.00-5,600.00 | 1 Piece (MOQ) |
| Model | Unit | ZX6350C |
| Table size | mm | 1200x280 mm |
| T slot no. /width/distance | mm | 3/16/50 mm |
| Max. load of Table | kg | 250 kg |
| Table XYZ axis Travel | mm | 600x240x355 mm |
| Spindle taper | ISO40 | |
| spindle speed /step -- Vertical | 115-1750/8steps | |
| --Horizontal | 40-1300/12steps | |
| Max.drilling dia. | mm | 30 |
| Max.end milling width | mm | 100 |
| Max. vertical milling Dia. | mm | 25 |
| Max.Tapping Dia. | mm | M16 |
| Quill travel | mm | 120 |
| swivel angle of headstock | ±45º | |
| Vertical spindle axis to column surface | mm | 230-680 |
| Vertical spindle nose to table surface | mm | 30-385 |
| Horizontal spindle axis to table surface | mm | 0-355 |
| Horizontal spindle axis to arm bottom | mm | 200 |
| Ram travel | mm | 500 |
| Longitudinal/cross feed | mm/min | 24-720/8steps |
| Longitudinal/cross rapid speed | mm/min | 720(X) |
| Main motor | kw | 0.85/1.5(V), 2.2(H) |
| Feed motor | kw | 0.37(X) |
| Coolant motor | kw | 0.04 |
| Overall dimension (CM) | cm | 152X1285X215 |
| N/W,G/W | kg | 1350/1500 |
| Drill chuck |
| Reduction sleeve |
| Draw bar |
| X axis auto power feed |
| Mill arbors |
| Collet chuck kits |
| Coolant system |
| Chip tray |
| Work lamp |
| Tools and box |
| Y axis power feed motor |
| Z axis motorized lifting |
| 3 axis DRO |
| Air draw bar |
| Separately control panel box |
| 58 pcs Clamping kits |
| Spindle protection |
| Worktable protection |
| Worktable swivel ±45 degree |
| Rotary table HV10 |
| Dividing head BS-0 |
| Machine vice 160mm |
