| US$9,800.00-13,000.00 | 1 Piece (MOQ) |
| Model | CNC-1328WC |
| Machine size | 4680*1840*2300 (mm) |
| Table height | 750mm |
| Max. Plate size | 2800*1300*50(mm) (length*width*thickness) |
| Left and right X-axis working stroke | 0-2800mm |
| Control system | Luolunchi control system |
| Laser sensor | Bonner /America |
| Front and rear Y-axis working stroke | Horizontal T1 spindle 0-100mm (Side lock type trim, punching, etc.) |
| Horizontal T2 spindle 0-130mm (Side locking, slot, punching, etc.) | |
| 45° T3 spindle 0-25mm (45° saw scrap edge) | |
| 45°T4 spindle 0-25mm (45° Lamino) | |
| Vertical T5 automatic tool changer spindle 0-80mm (ATC spindle / 6 positions) | |
| Vertical hinged drilling head 0-50mm | |
| Spindle brand | SCS/HQD/OAKMOND |
| Spindle speed | 18000RP m/min |
| Spindle power | T1 spindle 2.2KW |
| T2 spindle 6KW | |
| T3 spindle 3.5KW | |
| T4 spindle 3.5KW | |
| T5 spindle 9KW ATC spindle | |
| T6 hinged drilling head | |
| Upper and lower Z-axis working stroke | 0-80mm |
| Pressure material width | 200-1250mm |
| Pressure material height | 0-50mm |
| Screen | 10-inch touch screen |
| Servo motor | 1.5KW*3 sets(Z Axis with brake) |
| Inverter | Best / 11KW+6KW |
| Rail | 25mm linear rail |
| Tool sensor | Automatic tool sensor |
| Ball screw | 25mm high precision |
| Reducer | Shimpo |
| Table | PVC high toughness engineering board |
| Running speed | 10-100m/min |
| Working speed | 10-80m/min |
| Air access | 0.6MPa/ diameter 8MM air pipe |
| Power access | 4*6 m2 national standard cable |
| Working voltage | 380V/50HZ/3P |
| Main functions: | Three-in-one/ Two-in-one/ blind hole / groove / all kinds of stealth (wood, buckle, lamino, etc.) / all kinds of hardware handler / JC handle/free handle/The straightener / lamp with groove / 45° angle / 45° lamino / hinge hole / door lock hole, hardware installation hole, hinge hole (invisible hinge, multilayer hinge, world hinge, etc.), closing device / LOGO hole / support NC code processing, support scanning code |
