Welcome to visit

SNV-EFI 3.0 earth fault locator for power systen monitoring

Product Details

Product Details

Product Description

Product Description
SNV3.0 Grounding fault indicator
Type: LCD display
Note:
SNV-EFI3.0: LCD Display unit, with SNOVA CT ; SNV-EFI3.1: LCD Display unit with Rogowsky CT.
Description
SNV-EFI3.0 Earth fault indicator, it Widely used in various ring cabinets, high/ Medium or low -voltage switch gear and cable branch box in power system, can accurately and reliably detect the fault section and fault type of power grid in the Low/medium voltage network. The use of cable type grounding fault indicator is an efficient way to check cable fault, and is an effective way to improve the operation level of distribution network and the efficiency of fault handling. The design uses electromagnetic induction, and single chip microcomputer control technology to make fault alarm with high accuracy and strong anti-interference ability.
Equipped with fault remote transmission port, suitable for distribution network automation; Battery low power alarm indication; Low-power design, high-capacity lithium battery power supply, long battery life (more than 10 years); external structure using card or lock design, the whole machine is easy to load and unload.
Outlook:
Function character:
1) Intelligent detection of ground fault and through the corresponding LED on the display unit to indicate fault.
2) LCD screen display the grounding current on time.
3)Display unit designed with button, it is convenient for reset or test.
4)The pulse width time of fault current (response delay time) can be set to prevent incorrect fault indication caused by surge current.
5)It can reset and detect the remote fault indication device remotely by SCADA or press key.
6)It can provide switch volume for external devices through remote contact.
7)It can choose the reset time after fault happen (when purchase, it need to tell factory to set,default 8hours).
8)Remote fault indicating can be made by external lamp.
9)Earth fault alarm current,Multi-level can be settable via LCD buttons.
10)Low battery display and alarm test through press the “Test/reset” key by 3seconds.
11) Battery can be changeable conveniently, Big capacity 19000mHA,D- Size, ER34615.
12) Sensor cable spec: NYAF,copper cable,(2x1.5㎟ ) ,7 meters length.
13) 25-levels tripping current: From 10A to 250A, interval 10A, can be settable on LCD
14) Reset time adjustable: from Min. 1H up to 200H on LCD. Interval 1H.
15) Response delay time adjustable: from Min. 10ms up to 1000ms. Interval 10ms
Function description
1) Earth fault alarm indicating:
when the earth fault sensor detected an earth fault current, and the current is bigger than equal to or equal to the setting value and the fault current flow time is over the response delay time, then Indicator will display the alarm signal, at same time, the earth fault LED will be blinking.
2) Battery low voltage alarm indicating: the display unit use the battery to supply power. When we press the “R/T” button,3seconds time: If the battery voltage is lower than the Min. working voltage 2.5V, then the Battery Level Led will be blinking 5 times; If battery voltage is normal, then only blink 1 times.
4)Automatic time reset: After the indicator alarm the fault, if there are without manual reset it, when the time reach our reset time setting, indicator will automatically reset.
5) Manual reset: After the indicator alarm the fault, user can press the button “ R/T” in a short time to reset it.
6)Automatic Low voltage reset: Through inputting AC30-240V power to the pin 10,11 on the PCB in the display unit, when fault indicating, at same the voltage powered off. when the voltage recover and power on again, then indicator will be reset immediately via low voltage.
7) Out side AC110-240V power supply energy for display unit. It use the same as voltage of the “voltage reset” via pin 10,11.
8) Remote(SCADA) reset/test: through short connect the pin 3,4, then indicator will be run the reset/test process, and Led will be blinking.
*Connect the pin 3,4 by short time(1second), then it will be reset indicator.
*Connect the pin3,4 by a long time(1.5 ~3seconds), then it will be test indicator.
9)Remote indicating: Through connect the pin 5,6 to the external lamp , then it will be indicate fault when any phase alarm fault.
Character list
Display type
LCD
Working power
Battery as (back up)
Lithium battery (LiSOCl2)
3.6V/19000mAh,ER14505
Voltage grade
AC110V-40.5KV
Normal working
AC/DC 110-240V
Frequency
50HZ/60HZ
Power Consumption
standby/ idle: ≤ 0.3mA
working: ≤ 3mA
Earth fault alarm current Settable
10A up to 250A, Interval 10A
Battery life
≥10 year
Load fluctuation and escape pulse time setting, Settable
10ms up to 1000ms, interval 10ms
Low voltage alarm of battery
≤2.5V
Reset time,settable
1H up to100H, interval 1H
CT Cable type
NYAF, 2x1.5㎟, 5 meter;
Or customized
Alarm current accuracy
±10%
Work environment
Temperature
-40℃~+60℃
Rated frequency withstand voltage
2KV/1min
Humidity
≤95%RH
Relay contact capacity
≤95W
Use for Cable diameter
Ф60mm~110mm Normally
Indicate Lamp
red LED (Internal and external)

Ф80mm~150mm Customized
Connect SCADA
Available




>> Decorated Seamless Joint Solid Surface Cabinet Sink Hand Washing Basin
>> Mini Multifunction Ballpoint Pen Outdoor Emergency Pocket Tool Tactical Pen with LED Light
>> Factory Direct Custom Stainless Steel Closed Small Silo Screen Multifunctional New Condition
>> Stone Crushing Plant Mobile High Production
>> High-Quality Petri Dish 90X15mm Cell Culture Dish of Bacterial Food Industry
>> High-Precision CNC Milling Machine for Fine Work and Lathe
>> High-Performance Long Life Ring Die for Fertilizer Equipment
>> New Design Women Shaving Razor 5 Blade Safety Razor 3 Shave Cartridges
>> 100kN to 1000kN Wire Rope Cable Pulling Hydraulic Winch
>> 5kg 10kg 20kg Heavy duty Laminated dog animal packaging pet food package bag
>> Gap Bed 1250mm Turning Diameter with 2.5/3 Tons Load Capacity 1500mm 2000mm 3000mm 4000mm 6000mm 8000mm Horizontal Lathe Machine Torno Mesin Bubutcw
>> WEIKA Slim Competitive Price UPVC Single Wired Glass Swing Interior Doors
>> Professional manufacturer color photo frame for desktop customized home decor
>> Fixed blade snow pusher forklift attachments
>> SWAG Water Pump Fits AUDI 100 80 FORD SEAT Cordoba VW Passat 1.3-2.0L 1031879 95VW8503AA 068121005A
>> CNC Machine Tool Lathe Roll Rebar Machine for Steel
>> Custom Childproof Different Sizes Child Resistant Glass Tube for Pre Roll Preroll Cigarette Tobacco with Child Proof Cap Lid Customized Printed Label
>> Home Decor Modern Interior Statues Modern Electroplating Color Resin Sculpture
>> Car body parts front door for Nissan G11 Almera Classic door panel
>> babies summer blanket baby photo blanket for newborn 2 layer baby cotton muslin swaddle blankets