Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARN1747-L-TV | 17 | 47 | – | – | 57 | 43.5 | 16 |
| 38 | 28 | 38 | 9 | 23 | 11 | 0.3 | 0.6 |
|
| 39 | 26 | 26,000 | 57,000 | 14,000 | 19,900 | 7,800 | 2,100 | 0.4 | 1,600 | 160 | 0.464 | 1 | 0.41 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
Ministry of Chemical Industry High Pressure Petrochemical Special Ball Valve
>>
car flag,customized car window flag,Car Flags outdoor flags,Beach flag,custom flag,banner flags,flying banners,beach banner
>>
20 Litre Plastic Bottles Jerry Cans Jars Blow Molding Machine Making Machine
>>
Air Conditioned Aluminium Frame Wedding Marquee Church Party Tents with Church Window Walls
>>
Feeding Machine Plastic Granules Detachable Multi-Hopper Auto Loader
>>
Chinese Supplier Dehydrated Dried White Garlic Powder/Flake/Granules/Minced Garlic
>>
Horizontal Delin Quanzhou, China Multi Spindle Tapping Machine with CE AC-Wsk-8z
>>
High-Quality Customized School Educational AlNiCo Bar N-S Magnets for School Projects Cheap Price Free Sample
>>
Good Quality Solvent Based High Temperature Resistance Flexographic Printing Ink for Polypropylene Woven / Non Woven Bag Surface
>>
Best Selling Men Comfortable Half Sleeves Hoodies Collection Customized Design In Different Colors Available In Cheap Prices
>>
125cc/150cc/200cc New Design off-Road Motorcycle with Front Disc/Rear Drum Brakes (X-PLUS)
>>
Bsd-102lb Kilews Low Torque Compact DC Semi-Automatic Screwdriver for Production Line
>>
Customized various shapes metal perforated mesh for crafts product
>>
Smid-125 Residual Current Device Switch RCD
>>
Horicane Windows Miami Approved hurricane impact casement doors with florida approval
>>
Cattle and Sheep Breeding Equipment 20m3 Tmr Feed Spreader for Light Truck
>>
110V 220V 10W 20W Gold Plating Bird LED Light Creativity Bedside Bedroom Stairs Sconce Wall Chandelier Lamp
>>
Hydraulic Oil Filter 1r-0719 1r-0756 1r-1804 1r-0726 for Engine
>>
MAICTOP car rear tail door handle for Hilux revo 2015 gate handle
>>
Manure Pile Bedding Blending Compost Fertilizer Machinery for Fruit Residue
