Factory Wholesale Anti-Slip Environment-Protection Hollow / Solid Co-Extrusion Composite WPC Decking

Product Description

Advanges of Wood Plstic Composite
Natural Wood Texture,High Strength, Clean, Elegance Easy to Work,
Eco-Friendly, Ideal deco material for outdoors Water-proof,
Humidity-proof, Acid Base, Termite ProtectionHigh density,
Resistant,No Rotting, Non-deformation Durable Temperature
between -40 to +60 Centi Degree No Painting,No Glue and Low
Maintainence UV Protection,Stable ColorFully Environmental,
Recyclable, Saving Forest Resource Co-extrusion Decking Covered with a high polymer that completely encapsulates the board in an impermeable layer of protection from fading, staining mildew,and scratching.
created a patented process called Naturalerm on its that makes the board visually more matte and gives a realistic fibrous texture to the board. 3D Wood Grain Decking is a revolutionary products to traditional wPCThe embossing process didn't from "thermo print" but "pressure print" so this wood grain can stay at least 8-10 years.
It keeps plastic crust so the surface is more hard and absorb less water.Scratch will not work on the surface because of the hard surfaccwater/oil/wine stain will not stay on the surface as well Co-Extrusion Decking
Co-extrusion decking foor has solid, hollow 2 big kinds of product, apply to average household respectively
and the business place oferowd dense.In each of the subtle grooves, all the polymer composite protective layer 360 - degree full - covering technology.Ayoid mildew, water cracking, discoloration, deformation and warping defects of traditional solid wood. preservative wood.common outdoor profile and other productsPlastic Wood Co-Extrusion products have solid wood color changes and texture, polymer protective layer 360-degreefull coverage technology.While comprehensively enhancing the product strength.we also ensure that the product can withstand the severe test of outdoor enyironment and avoid various defects of traditionasolid wood and anti-corrosion wood roducts.The rich color sclection of the wholc color system further strengthens itshigh-end status in the field of outdoor foor, so as to adapt to different cultural backgrounds worldwide.develop new products and meet different demands of customers.

PRODUCT SPECIFICATION

Item

Standard

Requirements

Result

Slip Resistance Dry

EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007

Pendulum value≥36

Longtitudinal direction:Mean 72,Min 70 Horizontal direction:Mean 79,Min 78

EN 15534-4:2014 Section 4.4

Slip Resistance Wet

EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007

Pendulum value≥36

Longtitudinal direction:Mean 46,Min 44 Horizontal direction:Mean 55,Min 53

EN 15534-4:2014 Section 4.4

Falling mass impact resistance

EN 15534-1:2014 Section7.1.2.1

None of the speciments shall a failure with a crack length≥10mm or a depth of residual indentation≥0.5mm

Max.Crack length(mm):No crack Max.Residual indenation(mm):0.31

EN 15534-4:2014 Section 4.5.1

Flexural properties

EN15534-1:2014 AnnexA

-F'max:Mean≥3300N,Min≥3000N -Deflection under a load of 500N Mean≤2.0mm,Max≤2.5mm

Bending Strength:27.4 MPa Modulus of elasiticity:3969 MPa Maximum load: Mean 3786N,Min 3540N Deflection at 500N: Mean:0.86mm,Max:0.99mm

EN 15534-4:2014 Section 4.5.2

Creep behaviour

EN 15534-1:2014 Section7.4.1

Known span in use: Mean S≤10mm,Max S≤13mm, Mean Sr≤5mm

Span: 330mm,Mean S 1.65mm,Max S 1.72mm,Mean Sr 1.27mm

EN 15534-4:2014 Section 4.5.3

Swelling and water absorption

EN 15534-1:2014 Section8.3.1

Mean Swelling:≤4% in thickness,≤0.8% in width,≤0.4% in length Max swelling:≤5% in thickness, ≤1.2% in width,≤0.6% in length Water absorption: Mean:≤7%,Max:≤9%

Mean Swelling:1.81% in thickness,0.22% in width,0.36% in length Max Swelling:2.36% in thickness,0.23% in width,0.44% in length Water absorption:Mean:4.32%,Max:5.06%

EN 15534-4:2014 Section 4.5.5

Boiling Test

EN 15534-1:2014 Section8.3.3

Water absorption in weight: Mean≤7%,Max≤9%

Water absorption:Mean:4.32%,Max:5.07%

EN 15534-4:2014 Section 4.5.5

Linear thermal expansion coefficient

EN 15534-1:2014 Section9.2

≤50×10 K¹

34.2 x10 K¹

EN 15534-4:2014 Section 4.5.6 ISO 11359-2:1999

Resistance to indentation

EN 15534-1:2014 Section7.5

Brinell hardness: 79 MPa Rate of elastic recovery:65%

EN 15534-4:2014 Section 4.5.7

Heat reversion

EN 15534-1:2014 Section9.3

Test Temperature:100ºC Mean: 0.09%

EN 15534-4:2014 Section 4.5.7 EN 479:2018

---

>> Factory Direct Coin Slabs Ultrasonic Welding Machine Plastic Welder 15k 20k 2600w for Coin Plastic Holder Case
>> Reputable Crusher Spare Parts Supplier with Guaranteed Quality and Adaptable to Various Crushers /OEM 485.0073-901
>> Red and black white features provide drilling common DIY design hot sale customized photos favorite pictures nail printer
>> Automatic PP/PS/Pet Cup Rim Curling Machine
>> Sheet Metal Fabrication Service Stamping Enclosure
>> Nanofiber PM2.5 anti-fog haze gauze window screen with best price
>> Pedestal rockbreaker boom
>> Aluminum alloy rotating sprinkler head for cooling tower, cooling tower sprinkler head
>> Top Quality Peach Juice Concentrate Brix 65%, Drum Packing
>> Hollow plate production line equipment on-line
>> HC-B001A Mindray Chemistry analyzer reagent Mindray compatible reagents for Mindray 3 part BC series Hematology analyzer
>> Ready Mixed Cement Mixer Aggregate Movable Concrete Mixing Plant Small Capacity Mobile Concrete Batching Plant Easy Installation
>> Eco-Friendly Non-Woven Shopping Tote Bag
>> Landnovo modified type car led head lamp for Toyota highlander 2009 2010 2011 led headlight assembly
>> FZ3124-200 Travis Scott x Air Jordan 1 Low Golf “Olive”
>> Short Cycle Hot Press for Large-Scale Manufacturing
>> Manufacturer Factory Price Custom 1ton 2ton 3ton Micro Digger Small Bagger Mini Excavator with Attachments
>> Two Heads Tubular Computerized Embroidery Machine as-1202/as-1502 10% off
>> Underwire Tube Top Sports Back Shaping Vest Bottoming Underwear
>> R 087361 L 087360 Car (crystal) front fog lamp Auto Parts (crystal) Front fog lights for peugeot 206