| Specification | Unit | QK1313 | QK1319 | QK1322 | |
| Max. swing over bed dia. | mm | 630 | 630 | 670 | |
| Max. swing over cross slide dia. | mm | 330 | 330 | 370 | |
| Max. length of workpiece | mm | 1500/3000 | |||
| Width of bed | mm | 550 | |||
| Spindle bore | mm | 135 | 200 | 225 | |
| Power of spindle motor | kw | 11 | |||
| Mode of spindle speed | / | Two gears, stepless in gears | |||
| Spindle speed range | r/min | L: 0-130 H: 130-800 | L: 25-120 H: 100-500 | L: 25-120 H: 100-500 | |
| X/Z axis travel | mm | X:350 Z:1250 | |||
| X/Z rapid traverse speed | mm/min | 4000 | |||
| X axis motor | Speed | r/min | 1500 | ||
| Torque | N.m | 10 | |||
| Power | kw | 1.5 | |||
| Z axis motor | Speed | r/min | 1500 | ||
| Torque | N.m | 15 | |||
| Power | kw | 2.3 | |||
| Tailstock quill | Diameter | mm | 100 | ||
| Travel | mm | 250 | |||
| Taper | / | Morse 5 | |||
| Turret | Type | Vertical four station | |||
| Chuck | K11-380 3 jaw chuck | K11-500 3 jaw chuck | |||
| CNC control system | GSK, FANUC, SIEMENS | ||||
| Positioning accuracy | mm | 0.02 | |||
| Repeatability | mm | 0.01 | |||
| Overall dimension | mm | 3700*1755*1800 | 3700*1755*1800 | 3700*1755*1800 | |
| Net weight | T | 4.0 | 4.6 | 5.2 | |
