electric forklift refers to the operation of electric forklift trucks, most of which work for batteries. batteries are only one kind of batteries. their function is to store limited electric energy. therefore, when used in appropriate places, their working principle is to convert chemical energy into electric energy.
用过的电动叉车的电池里有这些电池。注意:电池不能水平放置!内,因为电池是22 ~ 28%的稀硫酸,电池是把电解液可以淹没板和左一点空间如果电池放下会有电极板的一部分暴露在空气中,这是非常不利于蓄电池极板,和平均细胞观察孔或电池的顶部有一个发泄与外界沟通,所以电池电解质斜也很容易流出。
these batteries are in the batteries of used electric forklift trucks. note: batteries can not be placed horizontally! internally, because batteries are 22-28% dilute sulfuric acid, batteries are electrolyte can submerge the plate and left space, if the battery is put down, there will be a part of the plate exposed to the air, which is very harmful to the battery plate, and the top of the average cell observation hole or battery has a vent to communicate with the outside world. so the electrolyte slant of the battery is easy to flow out.
1. battery capacity display
battery power indicator has the function of displaying the battery power of forklift truck, and can also display the statistics of using time.
when a moving vehicle needs to stop, please release the right throttle, move the right foot to the middle of the right foot brake pedal and step on it. the vehicle will stop.
3. directional control rod
when operating a forklift truck, the joystick on the main control panel on the right side of the seat moves forward, the vehicle moves forward and backward, and the vehicle moves backward.
4. speakers and reversing signals
in order to drive safely, the car is equipped with angular and twisting sound. in order to remind others, the car has a corner on the console button, a light pressure ring, the twisting sound and the pole use, the car backs up, and the twisting sound emits "di, di" alarm sound to remind others to pay attention.
pedal accelerator for acceleration and brake pedals
in order to determine whether the vehicle is moving forward or backward, the manual joystick is in place and the right foot is gently pressed on the pedal accelerator. the vehicle moves slowly forward or backward.
warning: do not slam the accelerator on the bottom of the vehicle until it loses control and has an accident.
6. angle adjustment of front and rear steering wheel
according to everyone's operating habits, the steering wheel angle can be adjusted appropriately. the adjustment method is as follows: loosen the screw fixed pin shaft and the steering rod of the body and wrench, gently turn the steering wheel to the appropriate position before and after, and then lock the screw.